CreeperX
The CreeperX line of communication gateways are designed to link building automation networks communicating on BACnet MS/TP or BACnet/IP with industrial control networks using the Modbus RTU or Modbus TCP/IP communication network. CreeperX is a high performance, fully configurable, cost-effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants. Common combinations of CreeperX include Modbus RTU, Modbus TCP, BACnet/IP, BACnet and MS/TP.
Usage And Specification
End applications: Industries such as Commercial Buildings, Industrial Automation, Pharmaceutical industry, Solar Energy, Wind energy etc.
End Users: System integrators
Features:
- Arm Cortex -M7 microcontroller running at 600Mhz clock.
- 4MB Program Flash and 32MB Data RAM.
- Realtime Operating System (RTOS) powered.
- On bard 4MBFlash for configuration saving.
- 10/100 Mbps Ethernet Interface.
- Worldwide unique 48-bit MAC ID
- 2X 15KV Isolated RS485 interface which eliminates ground loop problems.
- Slew rate controlled 5Volt transceiver brings long range, noise immune and robust communication.
- Guaranteed High Receiver Output State for Floating, Shorted or Terminated Inputs with No Signal Present.
- 1/8 Unit load transceiver support up to 256 slaves.
Specifications:
Power:
- 1 x Plug-in screw terminal block (3 poles)
- 9 to 36VDC +/-10%, Max.: 140mA. (OR)
- 24VAC +/-10% 50-60Hz, Max.: 127mA.
- Recommended: 24VDC.
Ethernet:
- 1 x Ethernet 10/100 Mbps RJ45.
- 2 x Ethernet LED: port link and activity
PortA:
- 1 x Serial EIA485 Plug-in screw terminal block (3 poles) A+, B-, Reference ground.
- 1500VDC isolation from other ports.
- Connector: Removable terminal block (28 to 16 AWG)
- Data Rate: Up to 256 Kbps
PortB:
- 1 x Serial EIA485 Plug-in screw terminal block (3 poles) A+, B-, Reference ground.
- 1500VDC isolation from other ports.
- Connector: Removable terminal block (28 to 16 AWG)
- Data Rate: Up to 256 Kbps
DIP Switch:
- 1 x DIP-Switch for serial EIA485 120Ohm load impendence selection.
Push Button:
- Reset to factory default configuration.
LED Indicators:
- Bicolor LED for Power ON/OFF and Status indication.
- Individual bicolor LED for RS485 Tx/Rx transaction indication.
Operating Temperature:
- 0 - 85 degC
Operating Humidity:
- 0-95% RH
Enclosure:
- Blend PC/ABS self-extinguishing Plastic type PC (UL 94 V-0),
- Dimensions in mm: (dxwxh): 119x101x35.
- Color: Dark Grey, Grey.
Mounting:
- DIN rail (EN 60715).
Standards:
- Meets IEC 61000-4-4 EFT and ESD.
- Meets ROHS Compliant